HD105 5050RGBW 30LEDs/m 60LEDs/m 72LEDs/m 96LEDs/m 144LEDs/m Pixel RGBW LED Strip DC12V (Upgrade on WS2815)
HD105
5050 SMD
DC12V
RGBW
60leds/M
14.4W/M
White/Black PCB
Refresh rate 16KHZ, transfer speed 30MHZ
IP Rate: IP20 IP65 IP67 IP68
- Description
- Inquiry
Description:
The upgrade item of WS2815RGBW, also two data cable, but higher refresh rate 16KHZ, transfer speed 30MHZ.
1pcs LED burn, the other LED will keep working.
LED Chip has black and white surface.
White & black both color available PCB.
DC12V input, suggest inject Power from start and end of the reel.
3M adhesive attached on strip.
5m/roll with a pair of JST SM connector.
Product Specifications:
| Product Name | HD105 RGBW LED Strip |
| LED type | 5050 SMD LED |
| IC type | HD105 |
| Emitting color | Digital RGBW |
| LED Q’ty | 60leds/m |
| Pixel Q’ty | 60pixels/m |
| Power | 14.4w/m |
| PCB Color | White/Black |
| IP Rating | IP20, IP65, IP67, IP68. |
| Length/Roll | 5M/Roll, strip length can be customized |
| Working Voltage | DC5V |
| Certification: | CE, EMC, FCC, LVD, RoHS |
| CRI (Ra>): | 80 |
| Warranty(Year) | 3Years |
| Model | LED Qty | IC Qty | Voltage | Max Power | Gray Scale | Color | Width |
| HD105-30-12V | 30 | 30 | 12V | 7.2W/M | 256 | Digital RGBW | 10mm |
| HD105-60-12v | 60 | 60 | 14.4W/M | 256 | 10mm | ||
| HD105-72-12V | 72 | 72 | 17.28W/M | 256 | 12mm | ||
| HD105-96-12V | 96 | 96 | 23.04W/M | 256 | 12mm | ||
| HD105-144-12V | 144 | 144 | 34.56W/M | 256 | 12mm |
Application:
(1) Applicable for automobile and bicycle decoration, border or contour lighting
(2) Widely used for home decoration use, hotels, clubs, shopping malls
(3) Architectural decorative lighting, boutique atmosphere lighting
LED Strip Connection Diagram:
NOTE
1. The AC wiring must be connected to the ground wire to prevent electric shock.
2. The specification is only for regular quotation products, specific products have specified parameters, which are not within the scope of this specification.
The overload current of the main wire of the LED Strip is the sum of the currents of the sub-wires, so in actual engineering applications, the model of the main wire should be appropriately increased to prevent the wire from overheating and accidents.
